A Simple 9-Point Checklist for Your Studio Audio Interface

Use this studio audio interface 9-point checklist to make sure you know what you’re getting

Use this studio audio interface 9-point checklist to make sure you know what you’re gettingA studio audio interface is one of the core fundamental devices you’ll find in any home studio. The audio interface is the bridge between your computer and the rest of your recording equipment.

To create and produce your own music you’ll need to record sounds into your studio computer’s DAW, and you’ll also need to listen back to the music you’re making through your studio monitors. All of this, and a whole lot more, is managed by the interface.

But before you dive in and invest in one, you need to get the low-down on the specific benefits and features you’ll find on a standard interface. I’ve created a 9-point checklist that runs through all of the important details for you, so you can quickly find out what you need to knowand why you need to know them.


Your Home Studio Audio Interface Fundamentals


Microphone Inputs

These are the connections for your microphones, using 3-pin XLR cables. They can also carry +48V of phantom power for condenser mics.


A typical audio interface front panel


Line Inputs

1/4″ jacks are used for connections to guitars, keyboards, studio monitors, mixing desks, and a whole host of other recording equipment devices.


Monitor Outputs

Where you connect your studio monitors, so you can play back the music you’ve created and recorded, especially important for mixing.


Headphones Output

Headphones are used for monitoring during recording. When you’re capturing a recording through a microphone, you can’t have anything playing through the studio monitors as the sound will spill into the mic and ruin the take. So the musician or vocalist has to listen to the music through a pair of headphones instead.


Phantom Power

For a condenser microphone to work, it needs a charge of +48V. Most modern interfaces will have a phantom power button for this purpose, and the power signal passes down the XLR cable and into the mic.


Mic Preamps

When you record a sound with a microphone, the electrical signal that’s generated is actually very weak. So before the signal is passed to other studio devices for further processing, it needs to be boosted. This is the job of the preamp.


A typical audio interface back panel


AD/DA Converters

In the real world, we hear sounds as analog waveforms, but computers work in the digital domain. These two worlds can’t communicate with each other directly, so what can be done to help?

When you record sound through a mic, the signal passes through an analog-to-digital (AD) converter inside the interface so the signal can be processed by the computer. When the computer outputs sound, it needs to be converted from digital back to analog. The digital-to-analog (DA) converter inside the interface takes care of it. Check that the studio audio interface you’re interested in has good AD/DA converters.


Direct Monitoring

When you’re recording, you need to hear that signal instantly inside your headphones so you can play your part with accurate timing. Direct monitoring lets you do this – it sends the inputted signal straight back to you, directly out of the headphones and monitor outputs.

If you didn’t have this feature, the signal would have to pass through the interface, be processed by the studio computer, then come back out of the interface. This introduces latency – a small time delay between what you play and what you hear back. Thats why direct monitoring is also known as zero-latency monitoring.


High-Speed Connection

The amount of data needed to process audio signals is huge, so the interface needs a high-speed connection to the studio computer. Most interfaces will be either USB 2.0 or FireWire 400, although some top-end interfaces use FireWire 800 or Thunderbolt.


Final Thoughts


The essential features of a studio audio interface that I’ve described above are vital if you’re going to gain the benefits for your home studio. Make sure any interface that you’re considering has these fundamentals built in – the success of your music productions could depend on them.

You can discover more about music production and home recording through the weekly newsletter – check out the form below to join in. There’s a free home studio guide (plus 2 extra bonuses) when you sign up as well. Or you can always share this info with your friends with the buttons below.